Today many DAC's do have a USB input.
Integrated amplifiers with a USB input enabling you to connect a PC are still a bit rare.
Amplification by PCM to PWM (Pulse Width Modulation) conversion.
Inputs: USB (XMOS, driver provided for Win systems) 24/192, Coaxial S/PDIF 24/192, Optical S/PDIF 24/96,
Ethernet with DSP optional and WAV,FLAC,AIFF decoding ability.
Power: 2*125@8ohm
Thd+N: 0,01% 20Hz-20KHz@full power
S/N: better than 112Db
Weight:17Kg
Output Power | 150 Watts/CH @ 8 Ohms, 300 Watts/CH @ 4 Ohms |
Output Stage | Quad Para Push-Pull Hitachi MOSFET Power Transistors, Class AB |
Power Supply | Custom Made 800 VA Toroidal Transformer 90,000 uF Capacitor Bank |
Frequency response | 20~45 kHz |
THD + N | < 0.05 % |
Volume control | Cirrus logic CS3310 digital volume control |
Analog inputs | 3 unbalanced analog line inputs 1 balanced analog line input 1 BYPASS input |
2 Analog Outputs | Pre-out, REC |
4 Digital inputs | COAX, OPTIC, PC USB Link, iPod COAX : up to 192 kHz / 24 bit |
Front Panel | POWER, BALANCED, CD, TUNER, AUX, DIGITAL, BYPASS, MUTE, Rotary Volume Encoder |
Full Function Remote Control | |
Dimension | 460 (W) X 86 (H) X 400 (D) mm |
Weight | 16 Kg (Net.) |
Mini Galaxy One Stereo Integrated Amplifier ($899,-)
Output Power : 2 x 13W (Ultralinear-Class AB Push-Pull)
S/N Ratio : >88 dB
Output Impedance : 4, 8 ohm
Input Mode : RCA / USB (For PC, I Pod)
Vacuum Tubes : EL84 x 4, 12AX7 x 2
USB specs not available on the website so probably limited to 16 bits/48 kHz.
Integrated amplifier with 300 Watts of dual mono balanced power capability per channel.
USB specs not available on the website so probably limited to 16 bits/48 kHz.
Unbalanced Input: 1 pair RCA phono
Balanced Inputs: 1 pair of 3-pin female XLR inputs
Digital Inputs: Coax BNC, TOSLink Optical, B type USB
Wireless Input: Bluetooth A2DP
Signal to Noise Ratio: -90dB all inputs
Frequency Range: 2.5Hz – 200kHz (-3dB)
USB specs not available on the website so probably limited to 16 bits/48 kHz.
Price: $8500 High Power Version (100W rms)
One of the inputs: asynchronous USB.
Full support of Apple’s iPod®, iPhone® and iPad® range of products.
According to the press release:
"the CP-800 can surpass the performance of conventional disc playback systems," said Dave Nauber, EVP of brand development. "A storage device like an iPod or computer can contain all the data of the original recording, so it has the potential to be an audiophile source," he said. "The challenge is to clock that data into the D/A converters at precisely the right time, which the CP-800 achieves through newly-developed recovery and clocking technology."
Available late 2010
13 W integrated amplifier.
USB specs not available on the website so probably limited to 16 bits/48 kHz.
2 x 100 Watts integrated amplifier.
Digital inputs: two Coax, two TOSLink and one 24/192 asynchronous USB
Analog input: 1 balanced XLR input and four single ended RCA inputs.
Technical specifications:
• Input impedance ( Single Ended ): 60 kOhm
• THD + N: < 0.005%
• Output Impedance: < 0,03 Ohm
• Frequency response: 1 – 225kHz
• Channel separation: > 120 dB
• Noise floor ( 1Vrms, 20 - 20 kHz, balanced): <-130 dB
• Damping factor: >300
•Rated output power
8 ohms 2 x 100 W
4 ohms 2 x 165 W
2 ohms 2 x 220 W
Pre-amp / headphone amp with analoque and digital inputs.
Single ended and balanced out + digital out.
COAX/OPT input: 32kHz, 44.1kHz, 48kHz, 88.2kHz and 96kHz, 176.4kHz and 192kHz
USB input: 32kHz, 44.1kHz, 48kHz and 96kHz
16 - 24bit 2ch PCM
100 W stereo receiver with USB.
USB specs not available on the website so probably limited to 16 bits/48 kHz.
2.1-channel integrated amplifier with 160 Watts x 2 @ 8 Ohms (RMS, both channels driven)
Amplifier
Class D amp modules 65 watts per channel <0.5%
distortion into 8Ω, 95 watts per channel <0.5%
distortion 4Ω, 20Hz-50kHz +/- 0.1dB
Preamplifier
Hybrid tube design (triode 6N1P) 5V output @ 2.0V input
Max output: 7V rms / 11.2V peak
Class A output stage <50Ω
Headphone Amplifer
Class A output with 6N1P tube in the circuit
Maximum output power: 100mW into 8 Ohm / 300mW into 150 Ohm / 150mW into 300 Ohm
Output impedance: <30Ω
Suitable for all electrodynamic headphones
DAC
ESS Sabre 9023 Upsampling 24/192
Sampling Rates : 44.1, 48, 88.2, 96, 176, 192
USB Asynchronous up to 24/192
Optical Up to 24/192
Coax Up to 24/192
<3ps jitter measured at master clock
2x 80 watt integrated amplifier with adaptive mode USB (24 bit / 96 kHz)
Inputs: 2 Coaxial S/PDIF (RCA), 1 TOSLINK optical, 1 USB. All inputs, excluding the USB (24-bit/96kHz), can accept up to a 24-bit/192kHz
Power: 50 watt/channel 4 Ohm, 25 watt/channel 8 Ohm
Dynamic Power Rating @ 1kHz:200Watt/channel 4 Ohm
Distortion (THS + N):1kHz at 1Watt: 0.03%, 1kHz at 45W: 0.11%
Signal-to-Noise Ratio:-103dB (signal on), -105dB (signal off)
Frequency Response:20Hz to 20kHz ±0.7dB
Mini-Integrated amplifier
DAC: ESS
Inputs:
2 analog
S/PDIF 24 bit 192kHz
Asynchronous USB 24 bit 96kHz
Outputs:
Pre-amp out
Headphone out
ICEpower amp 100 wpc in 8 Ohm